Stainless Steel Body Anchor

Body Anchors are available in four product ranges HWM/HWF BA, BD, and BH. This selection provides a considerable number of design options, catering to various load combinations, stone weights, and cavity widths. Each range is described in further detail below:

BA Body Anchors

BA Body Anchors are engineered to accommodate stand-off distances from 2 3/8" to 4 3/4" ( 60 - 120mm). Th ba-body-anchor e BA Body Anchors consist of a sturdy base element, a serrated washer, and a spade bolt. The BA Body Anchor can be connected to either the horizontal or the vertical panel joints.

Three dimensional adjustability can be achieved when the Body Anchors are used in combination with Anchor Channels.

baody anchor 图纸扁头栓头部尺寸

Type BA	Allowable Load Safety factor 2.5:1 lbs [kN]		Projection k inches [mm]		Body Dimensions inches [mm]			Spade Bolt Dimensions inches [mm]		Fastener
Type BA	Allowable Load Safety factor 2.5:1 lbs [kN]		Projection k inches [mm]		Body Dimensions inches [mm]			Spade Bolt Dimensions inches [mm]		Ø inches [mm]	Vertical Adjustment inches [mm]
Model	FV	Fh	min	max	L	h	X	M	Z		+/–
606	203[0.9]	203[0.9]	1-15/16[50]	2-1/4[70]	1-1/8[29]	3-1/4[95]	2[50]	1/4[7]	9/16[15]	5⁄16[8]	3/8[10]
608	135[0.6]	135[0.6]	2-3⁄8[60]	3-15/16[100]	1-7/16[36]	3-1/4[95]	2-1/4[55]	1/4[7]	11/16[18]	5⁄16[8]	3/8[10]
610	135[0.6]	135[0.6]	3-1/8[80]	4-1/4[120]	2-3/16[56]	3-1/4[95]	2-1/4 [55]	1/4[7]	11/16[18]	5⁄16[8]	3/8[10]
612	135[0.6]	135[0.6]	3-15/16[100]	5-1/2[140]	3[76]	3-1/4[95]	2-1/4[55]	1/4[7]	11/16[18]	5⁄16[8]	3/8[10]
1308	293[1.3]	293[1.3]	2-1/4[70]	3-15/16[100]	1-7⁄8[47]	4-⅛ [105]	2-1/2[65]	1/4[7]	11/16[18]	5⁄16[8]	3/8[10]
1301	293[1.3]	293[1.3]	3-9/16[90]	4-1/4[120]	1-7⁄8[47]	4-1/8[105]	2-1/2[65]	1/4[7]	11/16[18]	5⁄16[8]	3/8[10]
1312	293[1.3]	293[1.3]	4-1/8[105]	5-5/16[135]	1-7⁄8[47]	4-1/8[105]	2-1/2[65]	1/4[7]	11/16[18]	5⁄16[8]	3/8[10]

BD Body Anchors

BD Body Anchors are engineered to provide large stand-off distances of 5 1/2" to 11 3/4" (140 - 300mm) distances.BD Body Anchors are pre-assembled and consist of the main bracket, an adjustable wedge plate, and a spade bolt.

Vertical adjustment is obtained by using the sliding wedge plate, while the stand off distance is adjusted using the spade bolt. The BD Body Anchor can be pivoted around the fixing bolt to allow for lateral adjustment.

body anchor 2 图纸扁头栓头部尺寸

Type BD	Allowable Load Safety factor 2.5:1 lbs [kN]		Projection k inches [mm]		Body Dimensions inches [mm]			Spade Bolt Dimensions inches [mm]		Fastener
Type BD	Allowable Load Safety factor 2.5:1 lbs [kN]		Projection k inches [mm]		Body Dimensions inches [mm]			Spade Bolt Dimensions inches [mm]		Ø inches [mm]	Vertical Adjustment inches [mm]
Model	FV	Fh	min	max	L	h	X	M	Z		+/–
414	90[0.4]	112[0.5]	4-1/4[120]	6-11/16[170]	3-1/4[95]	3-5⁄8[92]	2[50]	1/4[7]	11/16[18]	5/16[8]	3/8[10]
416	90[0.4]	112[0.5]	5-1/2[140]	7- 1/2[190]	4- 1/2[115]	3-7⁄8[97]	2-1/8[55]	1/4[7]	11/16[18]	5/16[8]	3/8[10]
418	90[0.4]	112[0.5]	6-5/16[160]	8-1/4[210]	5-5/16[135]	4[102]	2-3⁄8[60]	1/4[7]	11/16[18]	5/16[8]	3/8[10]
420	90[0.4]	112[0.5]	7-1/16[180]	9-1/16[230]	6-1/8[155]	4-3/16[107]	2-9/16[65]	1/4[7]	11/16[18]	5/16[8]	3/8[10]
422	90[0.4]	112[0.5]	7-7⁄8[200]	9-13/16[250]	6-7⁄8[175]	4-7/16[112]	2-12/16[70]	1/4[7]	11/16[18]	5/16[8]	3/8[10]
424	90[0.4]	112[0.5]	8-11/16[220]	10-5⁄8[270]	7-5⁄8[195]	4-5⁄8[117]	3-[75]	1/4[7]	11/16[18]	5/16[8]	3/8[10]
1314	293[1.3]	380[1.7]	4-1/4[120]	6-11/16[170]	3-9/16[90]	5-1/8[130]	3-1/8[80]	1/4[7]	11/16[18]	3⁄8[10]	3/8[10]
1316	293[1.3]	380[1.7]	5-1/2[140]	7-1/2[190]	4-5/16[110]	5-5/16[135]	3-6/16[85]	1/4[7]	11/16[18]	3⁄8[10]	3/8[10]
1318	293[1.3]	380[1.7]	6-5/16[160]	8-1/4[210]	5-1/8[130]	5-11/16[145]	3-12/16[95]	1/4[7]	11/16[18]	3⁄8[10]	3/8[10]
1320	293[1.3]	380[1.7]	7-1/16[180]	9-1/16[230]	5-7⁄8[150]	5-1/8[130]	3-1/8[80]	1/4[7]	11/16[18]	3⁄8[10]	3/8[10]
1322	293[1.3]	380[1.7]	7-7⁄8[200]	9-13/16[250]	6-11/16[170]	5-1/2[140]	3-1/2[90]	1/4[7]	11/16[18]	3⁄8[10]	3/8[10]
1324	293[1.3]	380[1.7]	8-11/16[220]	10-5⁄8[270]	7-1/2[190]	5-11/16[145]	3-12/16[95]	1/4[7]	11/16[18]	3⁄8[10]	3/8[10]

HWM/HWF Body Anchors

HWM/HWF Body Anchors are engineered to accommodate stand-off distances of 1 1/2" - 5 1/8" (40 - 130mm). Precision adjustment can be achieved via the spade bolt and serrated vertical slot and washer.

HWM/HWF Body Anchors are comprised of a 3D base bracket, compressed rivet nut, spade bolt with locking nut, and toothed washer. The difference between HWM/HWF Body Anchors is how they are supplied.

HWM Body Anchors are delivered pre-assembled. The HWM spade bolt is threaded into the base bracket and fixed permanently so that it cannot be removed from the bracket. HWF Body Anchors are delivered with the intent of on-site assembly.

HWM/HWF both have a serrated vertical slot to allow up and down adjustment of the anchors

HWM anchor

扁头栓头部尺寸

Type HWM HWF	Allowable Load Safety factor 2.5:1 lbs [kN]		Projection k inches [mm]		Body Dimensions inches [mm]			Spade Bolt Dimensions inches [mm]		Fastener
Type HWM HWF	Allowable Load Safety factor 2.5:1 lbs [kN]		Projection k inches [mm]		Body Dimensions inches [mm]			Spade Bolt Dimensions inches [mm]		Ø inches [mm]	Vertical Adjustment inches [mm]
Model	FV	Fh	min	max	L	h	X	M	Z		+/–
504	113[0.5]	79[0.35]	1-7/16[37]	1-15/16[49]	9/16[15]	3-⅛[79]	1-5⁄8[42]	1/4[7]	9/16[15]	3/8[10]	3/8[10]
505	113[0.5]	79[0.35]	1-7⁄8[47]	2-5/16[59]	9/16[15]	3-⅛[79]	1-5⁄8[42]	1/4[7]	9/16[15]	3/8[10]	3/8[10]
506	113[0.5]	79[0.35]	2-1/16[52]	2-11/16[69]	1[25]	3-5/16[84]	1-1/4[44]	1/4[7]	9/16[15]	3/8[10]	3/8[10]
408	90[0.4]	72[0.32]	2-5⁄8[67]	4[101]	1-9/16[40]	3-9/16[90]	1-7⁄8[47]	1/4[7]	9/16[15]	3/8[10]	3/8[10]
410	90[0.4]	72[0.32]	3-7/16[87]	4-1/4[121]	2-3⁄8[60]	3-7⁄8[98]	1-15/16[50]	1/4[7]	9/16[15]	3/8[10]	3/8[10]
411	90[0.4]	72[0.32]	4[102]	5-1/4[136]	3[75]	4[102]	2-1/16[53]	1/4[7]	9/16[15]	3/8[10]	3/8[10]
413	90[0.4]	72[0.32]	4-5⁄8[117]	5-15/16[151]	3-9/16[90]	4-1/4[108]	2-3/16[56]	1/4[7]	9/16[15]	3/8[10]	3/8[10]