STANDARD PRODUCTS CONDITIONS
Condition: Hot Rolled, Annealed & Pickled
• Laser fused and Hot rolled standard sections are produced according to ASTM A484 tolerances.
• Intergranular corrosion test according to ASTM A262 practices A, C & E (where applicable)
• Material free of contamination from mercury or metals at ambient temperature
We can produce both standard and custom profiles
| Size | Web | Flange | ||
| h | tw | b | tf | |
| Hot Rolled(Tapered) | ||||
| BC 1×1/2×1/8 | 1 | 0.125 | 0.5 | 0.125 |
| BC 1×1/4×1/2×1/8 | 1.25 | 0.125 | 0.5 | 0.125 |
| BC 1×1/2×1/2×1/8 | 1.5 | 0.125 | 0.5 | 0.125 |
| BC 1×1/2×3/4×1/8 | 1.5 | 0.125 | 0.75 | 0.125 |
| Hot Rolled(Non Tapered) | ||||
| BC 2×1×1/8 | 2 | 0.125 | 1 | 0.125 |
| BC 2×1×3/16 | 2 | 0.1875 | 1 | 0.1875 |
| BC 2×1×1/4 | 2 | 0.25 | 1 | 0.25 |
| Grade | |||
| Channels,Tees,Beams and Angle Bars | Applicable Standards | AISI-304/304L UNS-S30400 | AISI-316/316L UNS-S31600 |
| LASER FUSED | ASTM A1069 | ╳ | ╳ |
HOT ROLLED | ASTM A276 | ╳ | ╳ |
| ASTM A47/A479M | ╳ | ╳ | |
| ASME SA479 | ╳ | ╳ | |
| Chemical Values | |||||||||||
| Grade | C | Si | Mn | Ni | Cr | Mo | S | P | N | Cu | Co |
| 304/304L | 0.03 | 1.0 | 2.0 | 8-12 | 18-20 | 1.0 | 0.030 | 0.045 | 0.10 | 1 | Report |
| 316/316L | 0.03 | 1.0 | 2.0 | 10-14 | 16-18 | 2-3 | 0.030 | 0.045 | 0.10 | 0.75 | Report |
| Minimum Mechanical Properties | |||||
| Grade | T [KSI] | YS(1) [KSI] | EL(1) [%] | RA(1) [%] | HB |
| 304/304L |
75 |
30 |
30 |
50 |
140-241 |
| 316/316L | |||||
