STANDARD PRODUCTS CONDITIONS
Condition: Hot Rolled, Annealed & Pickled
• Laser fused and Hot rolled standard sections are produced according to ASTM A484 tolerances.
• Intergranular corrosion test according to ASTM A262 practices A, C & E (where applicable)
• Material free of contamination from mercury or metals at ambient temperature
We can produce both standard and custom profiles
| Size | Leg1 | Leg2 | ||
| h | tw | b | tf | |
| Hot Rolled or Extruded(Tapered) | ||||
| S 3×5.7 | 3 | 0.17 | 2.33 | 0.26 |
| S 4×7.7 | 4 | 0.193 | 2.66 | 0.293 |
| S 5×10 | 5 | 0.214 | 3 | 0.326 |
| S 6×12.5 | 6 | 0.232 | 3.33 | 0.359 |
| Laser Fused | ||||
| S 3×7.50 | 3 | 0.349 | 2.51 | 0.26 |
| S 4×9.50 | 4 | 0.326 | 2.8 | 0.293 |
| S 6×17.25 | 6 | 0.465 | 3.57 | 0.359 |
| S 8×18.4 | 8 | 0.271 | 4 | 0.425 |
| S 8×23 | 8 | 0.441 | 4.17 | 0.425 |
| S 10×25.4 | 10 | 0.311 | 4.66 | 0.491 |
| S 10×35.0 | 10 | 0.594 | 4.94 | 0.491 |
| S 12×31.8 | 12 | 0.35 | 5 | 0.544 |
| S 12×35.0 | 12 | 0.428 | 5.08 | 0.544 |
| S 12×40.8 | 12 | 0.462 | 5.25 | 0.659 |
| S 12×50.0. | 12 | 0.687 | 5.48 | 0.659 |
| S 15×42.9 | 15 | 0.411 | 5.5 | 0.622 |
| S 15×50.0 | 15 | 0.55 | 5.64 | 0.622 |
| Grade | |||
| Channels,Tees,Beams and Angle Bars | Applicable Standards | AISI-304/304L UNS-S30400 | AISI-316/316L UNS-S31600 |
| LASER FUSED | ASTM A1069 | ╳ | ╳ |
HOT ROLLED | ASTM A276 | ╳ | ╳ |
| ASTM A47/A479M | ╳ | ╳ | |
| ASME SA479 | ╳ | ╳ | |
| Chemical Values | |||||||||||
| Grade | C | Si | Mn | Ni | Cr | Mo | S | P | N | Cu | Co |
| 304/304L | 0.03 | 1.0 | 2.0 | 8-12 | 18-20 | 1.0 | 0.030 | 0.045 | 0.10 | 1 | Report |
| 316/316L | 0.03 | 1.0 | 2.0 | 10-14 | 16-18 | 2-3 | 0.030 | 0.045 | 0.10 | 0.75 | Report |
| Minimum Mechanical Properties | |||||
| Grade | T [KSI] | YS(1) [KSI] | EL(1) [%] | RA(1) [%] | HB |
| 304/304L | 75 | 30 | 30 | 50 | 140-241 |
| 316/316L | |||||
