Maraging Alloy 250 Steel Round Bars

Maraging Alloy 250 Steel Round bars cobalt containing grade of maraging steel, produced by vacuum arc re-melting, provides very high strength (nominally 250 ksi tensile) with an above average level of toughness.
Maraging Alloy 250 Steel Round bars retains its strength up to 450°C and good notch impact is maintained down to minus 50°C and below. Maraging Alloy 250 Steel Round bars material may be nitrided. C250 is usually supplied in the annealed condition where the microstructure consists of fine martensite. This structure is then maraged (precipitation hardened) to achieve final properties employing a relatively low temperature that results in the required combination of high strength and toughness. The alloy has a density of 8.02 g/cc.
Chat Now

Product Details

Maraging Alloy 250 Steel Round Bars


▼Maraging Alloy 250 Steel Round bars Machinability & Welding:
Maraging Alloy 250 Steel Round bars are usually machined in the annealed condition, however, they can be machined in the maraged condition. Components can be machined close to finished dimensions as the low temperature maraging treatment results in minimal distortion. In addition, Maraging Alloy 250 Steel Round bars the small contraction of approximately 0.05% due to maraging results in good dimensional stability.


▼Maraging Alloy 250 Steel Round bars Typical Applications:

◆Missile casings

◆Tooling

◆Ordnance mounting blocks

◆High performance autosport components

◆Couplings

◆Jet engine and helicopter drive shafts

◆Load cells

alloy 250 steel round bars


Dimension NameValue
Alloy250
TemperAnnealed
DiameterCustom Dia
Max Length6 meter
MTR AvailabilityYes
MaterialMaraging Steel
ShapeBar-Round
Custom Cut Warehouse0



▼Material Specifications

This material meets the following specs: MIL-S -46850, AMS -6512

Chemistry Information: 250 Maraging Steel
ElementPercentage
Al0.1
B0.003
Co7.5
C0.03max
Fe68
Mn0.1max
Mo4.8
Ni
18.5
P0.01max
Si0.1max
S0.01max
Zr0.01
Ti0.4


▼Technical Assistance

Maraging Alloy 250 Steel Round bars is available in bar and forgings. We can also process the material for you, courtesy of 30 band saws available throughout the Wisine which includes availablity and local service centre level.

Our knowledgeable staff and resident metallurgists will be pleased to assist you further on any technical topic Maraging Alloy 250 Steel Round bars. We believe this underlines our total commitment to quality and our ethos of being the complete service provider.



Inquiry

You Might Also Like